Would you like to react to this message? Create an account in a few clicks or log in to continue.

Ruger SP-101 trigger job

4 posters

Go down

Ruger SP-101 trigger job Empty Ruger SP-101 trigger job

Post by miketx Tue Aug 24, 2021 7:52 pm

Ruger SP-101 trigger job 70242

I find that the 14-pound pull or thereabouts on my Ruger was a bit much and affected accuracy so I wanted to lighten it up. I know it is by no means a target gun but it couldn't hurt so I ordered the SP-101 spring kit from Wolff Gun Springs at gunsprings.com.

Ruger SP-101 trigger job Spring-kit-jpg

It was 10 bucks plus the shipping, so around 14 dollars. It comes with four springs, three different weight hammer springs, and one trigger spring. They say if you go with the lightest hammer spring you should replace the trigger spring with the one in the kit.

This pak contains 1 each 9, 10, and 12 pound reduced power hammer springs for Ruger SP-101 series revolvers and 1 each 8 pound trigger return spring allowing adjustment for lighter and smoother trigger and hammer action. Note: Factory trigger return spring is 10 pounds, factory hammer spring is 14 pounds.

Here is a video that shows how to do it. Follow all the precautions they say about not pulling the trigger when it's apart. I found out the hard way because somehow I pulled it.



I don't know how but I moved the trigger pawl, and a teeny tiny spring and plunger went flying! I looked and looked but never could find the parts. No touch trigger if you can help it! Note that I did not disassemble the trigger assembly as they do in the video, all I did was replace the trigger return spring with was fairly easy.

Ruger SP-101 trigger job Ruger_sp101_schem-1-jpg

^^^before I wrote on the image^^^

Ruger SP-101 trigger job Ruger_sp101_schem-jpg



I ordered the parts from Sturm-Ruger and they sent them at no charge and no shipping! Can't beat that!

I just got it all put back together and the trigger pull feels like it's a little more than half of what it was! When I get to the range, I'll post a range report next week sometime. It wasn't that hard once I got it apart and after decades of working on tiny parts and stuff in transmissions, it was fairly easy except for the lost parts. So if you think you wanna give it a try, go for it!
miketx
miketx

Posts : 173
Points : 1420
Reputation : 24
Join date : 2021-08-22

HawkTheSlayer and Red Lily like this post

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by miketx Tue Aug 24, 2021 7:55 pm

Went to the range today and shot a hundred rounds of 38/357. The 357 was some off-brand imported stuff, and I threw the box away so I can't recall the name. The 38 was American Eagle. All the 38 went bang but I had two light strikes with the magnum stuff. I don't know if it's the ammo or the gun seeing how it was no name import, but I'm just assuming. So, given my paranoia, I researched the trigger job and people that have had that happen say they took the 9 pound hammer spring out and replaced it with the ten-pound spring and all was good. I changed the spring. I can't tell much difference in the pull so that's good. I'll shoot it again this week and let you know.

Now for accuracy improvement. I'd say it was all good. This is one of the Shoot n See targets I used.


Ruger SP-101 trigger job Sp101-target-jpg

It's a super crappy image because my flip phone will not be recognized by my PC so I took a picture of the image on the phone with my camera and copied it here. I'm happy with that accuracy if the light strikes are done. Oh yeah, it was at about 10 yards.


Went back to the range after replacing the 9 lb spring with the ten, and shot 100 rounds of 357 and around 25 38 specials. No light strikes. The trigger feels nice and has definitely improved accuracy. All good!
miketx
miketx

Posts : 173
Points : 1420
Reputation : 24
Join date : 2021-08-22

HawkTheSlayer and Red Lily like this post

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by HawkTheSlayer Tue Aug 24, 2021 8:14 pm

Nice shooting and keep us up to date.

_________________
Evil is da Devil minus da D.
HawkTheSlayer
HawkTheSlayer

Posts : 15630
Points : 20074
Reputation : 569
Join date : 2021-01-31
Location : Acadiana

Red Lily and miketx like this post

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by jirqoadai Tue Aug 24, 2021 9:02 pm

miketx wrote:This is one of the Shoot n See targets I used. and that flyer? yeah. that can be annoying, but its just me!
fbi says 7 yards Paul
jirqoadai
jirqoadai

Posts : 8012
Points : 9988
Reputation : 123
Join date : 2021-03-02
Location : hillary still hasnt been shot for treason

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by Crusader Tue Aug 24, 2021 9:33 pm

I've always wanted an SP101.  I saw one on line where the guy polished it so that it looked like chrome and put Badger grips on it.  It was sweet.

https://badgercustomgrips.com/ruger

Ruger SP-101 trigger job 711f48eac5b7301c0f9bd8c861acbfa5

I like the looks of the Kimber K6s.

Ruger SP-101 trigger job Kimber-K6G-357-magnum-deluxe_100887875_597_03C8F9B8AC2FC8F7
Crusader
Crusader

Posts : 3579
Points : 5229
Reputation : 225
Join date : 2021-02-09
Location : Texas

HawkTheSlayer and miketx like this post

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by miketx Wed Aug 25, 2021 8:41 am

f--k the fbi
miketx
miketx

Posts : 173
Points : 1420
Reputation : 24
Join date : 2021-08-22

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by jirqoadai Wed Aug 25, 2021 8:46 am

miketx wrote:f--k the fbi
i think Peanut is still in the FBI. as a whole, yes. they suck. are there at least ten good ones? must be. or fire and brimstone would fall down on them.
jirqoadai
jirqoadai

Posts : 8012
Points : 9988
Reputation : 123
Join date : 2021-03-02
Location : hillary still hasnt been shot for treason

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by miketx Wed Aug 25, 2021 10:09 am

jirqoadai wrote:
miketx wrote:f--k the fbi
i think Peanut is still in the FBI. as a whole, yes. they suck. are there at least ten good ones? must be. or fire and brimstone would fall down on them.

I dealt with two fbi agents at my last job. Two bigger dick heads would have been hard to find. They didn't care about any rules or regulations because they were the fbi. I got no use for any government-paid scumbags.
miketx
miketx

Posts : 173
Points : 1420
Reputation : 24
Join date : 2021-08-22

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by jirqoadai Wed Aug 25, 2021 10:12 am

you can fight them all, but itll be easier on you if you convince a few to bring down the mess from within
jirqoadai
jirqoadai

Posts : 8012
Points : 9988
Reputation : 123
Join date : 2021-03-02
Location : hillary still hasnt been shot for treason

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by jirqoadai Wed Aug 25, 2021 10:18 am

heres a for instance. Alan Pinkerton. ALMOST won the CW singlehandedly, for the CSA.
jirqoadai
jirqoadai

Posts : 8012
Points : 9988
Reputation : 123
Join date : 2021-03-02
Location : hillary still hasnt been shot for treason

Back to top Go down

Ruger SP-101 trigger job Empty Re: Ruger SP-101 trigger job

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum